Oil and gas

SY-29 Synergi Gas complete compressor modelling

SY-29 Synergi Gas standard complete compressor modelling training

This is an intermediate/advanced level course that solely focuses on compressor modelling in Synergi Gas

Description

This is an intermediate/advanced level course that solely focuses on compressor modelling in Synergi Gas. We start with a review of 'Basic compressors', including theoreticals and general station terminology and controls. Much of this material is included in the 'Standard plus compressors' training. Next we discuss how the program calculates the compressibility factor and gas properties, and then include the Station Analysis tool.

The second day covers drivers, centrifugal compressors and reciprocating compressors.

The last day covers recycle, losses, temperature effects and more controls. Additional tools and modules we may cover include services, compressor station site polygons, temperature polygons, the station spacing tool, compressor behaviour in USM/TVM, and Steady State Optimization.

Learning objectives

You will learn how to model reciprocating compressors using data from the manufacturer or eRCM. You will learn how to model centrifugal compressors using a head-flow map and curves for power and fuel. You will learn about the different ways to model fuel, de-rate power, and select units within a station. You will learn how constraint interchange is applied to compressor stations on multiple levels, and how that positively affects your results.

Target group

Users who have attended a Synergi Gas standard course and/or have experience using Synergi Gas advanced hydraulic modelling software, and need to learn about compressor modelling beyond theoretical driver/compressors.

Contact us:

REGISTER HERE

Training offered on request

Request training

When:

17 June - 21 June 2024

Add to calendar 2024/06/17 09:00 2024/06/21 18:00 SY-29 Synergi Gas complete compressor modelling This is an intermediate/advanced level course that solely focuses on compressor modelling in Synergi Gas
https://www.dnv.com.au/training/sy-29-synergi-gas-complete-compressor-modelling-13103
This only adds the event to your calendar, please remember to register for this event.
false YYYY/MM/DD akeGphYOczrmtQTfhmEQ22349
Available dates and venues

Prerequisite:

Significant experience as a Synergi modeller with a good working knowledge of compression. Completion of SY-25 Synergi Gas standard course. This course assumes you are proficient in the use of the latest version of the product.

Course:

SY-29 Synergi Gas complete compressor modelling

Description

This is an intermediate/advanced level course that solely focuses on compressor modelling in Synergi Gas. We start with a review of 'Basic compressors', including theoreticals and general station terminology and controls. Much of this material is included in the 'Standard plus compressors' training. Next we discuss how the program calculates the compressibility factor and gas properties, and then include the Station Analysis tool.

The second day covers drivers, centrifugal compressors and reciprocating compressors.

The last day covers recycle, losses, temperature effects and more controls. Additional tools and modules we may cover include services, compressor station site polygons, temperature polygons, the station spacing tool, compressor behaviour in USM/TVM, and Steady State Optimization.

Learning objectives

You will learn how to model reciprocating compressors using data from the manufacturer or eRCM. You will learn how to model centrifugal compressors using a head-flow map and curves for power and fuel. You will learn about the different ways to model fuel, de-rate power, and select units within a station. You will learn how constraint interchange is applied to compressor stations on multiple levels, and how that positively affects your results.

Target group

Users who have attended a Synergi Gas standard course and/or have experience using Synergi Gas advanced hydraulic modelling software, and need to learn about compressor modelling beyond theoretical driver/compressors.

Available dates and venues

Dates Venue Register by Course fee Computer
Dates
ONLINE TRAINING:
Dates
17-21 June 2024
12:00 AM - 5:00 PM    
US EST - Eastern Standard Time 
Venue
Online, delivered from USA
Register by
3 June
Course fee
USD 2550 or training seat if available
Computer
Attendees use their own PC with the latest software version installed

SY-29 Synergi Gas complete compressor modelling training

REGISTER HERE